Description: CYPRESS USB bulk transfer speed test source code-CYPRESS USB bulk transfer speed test sourc e code Platform: |
Size: 57248 |
Author:汪洪波 |
Hits:
Description: CYPRESS USB bulk transfer speed test source code-CYPRESS USB bulk transfer speed test sourc e code Platform: |
Size: 57344 |
Author:szoctavia |
Hits:
Description: 本例是一个采用ARM7TDMI内核心的S3C44BOX芯片上实现USB批量数据传输，再通过串口将数据发送至PC机串口显示出数据内容。已经通过ADS1.2测试-This case is an ARM7TDMI core using the S3C44BOX chip USB bulk data transfer, and then through the serial data sent to PC Serial Port data content showing. Has passed the test ADS1.2 Platform: |
Size: 87040 |
Author:mengchen |
Hits:
Description: 本固件程序用于CYPRESS公司的FX2系列高速USB芯片，实现数据的双向透明传输，即不对数据进行处理，只实现传输功能。程序采用GPIF方式，批量传输模式。经过调试，完全可用，已经用于上市的产品。通用性强，根据具体应用，只需做少量更改即可使用，可作为固件设计的样本。开发环境为Keil C。-The firmware for CYPRESS companies FX2 series of high-speed USB chips, transparent two-way data transmission, data processing that is not only the realization of transfer functions. Procedures for the use of GPIF way bulk transfer mode. After debugging, completely available, has been used to market products. High universality, according to specific applications, just do a small amount of change to use, can be used as a sample of firmware design. Development environment for the Keil C. Platform: |
Size: 108544 |
Author:周继勇 |
Hits:
Description: 关于USB开发所要用到的MASSBULK传输协议，标准协议-With regard to the development of the USB to use the MASSBULK Transfer Protocol, the standard agreement Platform: |
Size: 86016 |
Author:丁后兴 |
Hits:
Description: 这是基于CY7C68013芯片，实现块传输的程序。包括USB固件程序和相应的WIN32程序。-This is based on the CY7C68013 chip, to achieve block transfer procedure. Including the USB firmware and corresponding WIN32 procedures. Platform: |
Size: 124928 |
Author:张梓剑 |
Hits:
Description: 2812 USB程序，块传输实现与上位机通讯，数据传输-2812 USB procedures, block transfer with the host computer communication, data transmission Platform: |
Size: 194560 |
Author:戴杰 |
Hits:
Description: usb bulk 传输例程。
* The bulkusb driver is a generic function driver, based on the Windows Driver Model (WDM).
* Supports Plug and Play(PnP), Power Management(PM), Windows Management Instrumentation (WMI) and the Selective Suspend (SS) features.
* This sample is based off the selSusp DDK sample. Please refer the selSusp sample and the DDK docs to understand the handling of PnP, PM, WMI and SS features and implementations.
*
The USB device used for this sample is a generic Intel I82930 USB evaluation board programmed with a simple loopback test using a 64 KB circular buffer. None of the code in the sample is specific to this controller chip.
-usb bulk transfer routines.* The bulkusb driver is a generic function driver, based on the Windows Driver Model (WDM).* Supports Plug and Play (PnP), Power Management (PM), Windows Management Instrumentation (WMI) and the Selective Suspend (SS) features.* This sample is based off the selSusp DDK sample. Please refer the selSusp sample and the DDK docs to understand the handling of PnP, PM, WMI and SS features and implementations.* The USB device used for this sample is a generic Intel I82930 USB evaluation board programmed with a simple loopback test using a 64 KB circular buffer. None of the code in the sample is specific to this controller chip. Platform: |
Size: 56320 |
Author:James |
Hits:
Description: STM32是以Cortex-M3为核的处理器，该例程介绍STM32下如何对DMA进行操作。在许多情况下需要用到DMA，比如USB的批量传输等。-Cortex-M3 based STM32-core processor for the routine introduction STM32 how to operate on the DMA. In many cases the need to use DMA, such as USB bulk transfer. Platform: |
Size: 50176 |
Author:熊刚 |
Hits:
Description: USBHostSlave is a USB 1.1 host and Device IP core.
– Supports full speed (12Mbps) and low speed (1.5Mbps) operation.
– USB Device has four endpoints, each with their own independent FIFO.
– Supports the four types of USB data transfer control, bulk, interrupt, and isochronous
transfers.
– Host can automatically generate SOF packets.
– 8-bit Wishbone slave bus interface.
– FIFO depth configurable via paramters.-USBHostSlave is a USB 1.1 host and Device IP core.
– Supports full speed (12Mbps) and low speed (1.5Mbps) operation.
– USB Device has four endpoints, each with their own independent FIFO.
– Supports the four types of USB data transfer control, bulk, interrupt, and isochronous
transfers.
– Host can automatically generate SOF packets.
– 8-bit Wishbone slave bus interface.
– FIFO depth configurable via paramters. Platform: |
Size: 6144 |
Author:polito |
Hits:
Description: USB bulk传输方式的例子，用cypress芯片做主控芯片，很不错，搞USB的下去参考。-USB bulk transfer mode example, the controlling chip with cypress chips, very good, engaging in USB-go reference. Platform: |
Size: 45056 |
Author:shanyao |
Hits:
Description: usb 数据采集器，usb批量传输，usb万能调试，usb visa驱动-Usb data collector, usb bulk transfer, usb universal debugging, usb visa drive Platform: |
Size: 19456 |
Author:jiarong |
Hits:
Description: STM32 USB批量传输 CDC类，同时附USB资料及上位机开发源码-STM32 USB bulk transfer CDC class, while attached USB host computer and data source development Platform: |
Size: 45163520 |
Author:陈鹏 |
Hits:
Search - USB Bulk transfer